|
|
|
|
|
BENDING MACHINE
|
| |
| models: KOMAND B-40MA and KOMAND B-46MA |
|
|
|
The Bending Machine is designed for bending of armature and serial profile up to ô40 (ô46) mm.
|
| |
|
Technical Specification |
|
|
|
|
Komand B-46MA |
Komand B-40MA |
|
Diameter of the bending item, mm |
up to 46 |
up to 40 |
|
Spins of bending plate, min-1 |
11,5 |
|
Time to turning of the bending plate of 90º, s |
1,3 |
|
Maximum angle of bending, º |
180 |
|
Power, kW |
3 |
2,2 |
|
Voltage, V |
380 |
|
Weight , kg |
460 |
430 |
|
Measurements – L x B x H, mm |
1000 õ 810 õ 1010 |
|
| |
| Diameter of bending armature ô, mm |
Komand B-46MA |
46 |
28 |
24 |
| Komand B-40MA |
40 |
25 |
44 |
|
Maximum quantity simultaneously bending items, pieces |
1 |
2 |
3 |
|
| |
Manual mode:
When you press the buttons/pedals the bending plate stops and turns left or right.
The turning of the bending plate stops when the respective button/pedal is released.
Automatic mode:
One complete cycle is finished when pressing and holding the pedal, after that it could de released.
During automatic cycle the pedal could be released afterwhich the banding plate stops turning.
If the pressing and holding of the pedal is done one more time then the automatic cycle continues until its completion or until new release of the pedal.
|
| |
 |
|
